Rank Product Name Score
1 Antrader Endstop Mechanical Limit Switches with 3 Pin 70cm Cable for RAMPS 1.4 Control Board Part Switch Accessories 3D Printers Parts Set of 6 Antrader Endstop Mechanical Limit Switches with 3 Pin 70cm Cable for RAMPS 1.4 Control Board Part Switch Accessories 3D Printers Parts Set of 6
Guangzhou Openfind Electronic Commerce CO., LTD
9.8 GET ON AMAZON
2 Maxmoral 4pcs Mechanical Endstop 3D Printer Ramps 1.4 Control Board Part Switch Accessories Limit Switch with 3 Pin 70cm Connecting Cable Maxmoral 4pcs Mechanical Endstop 3D Printer Ramps 1.4 Control Board Part Switch Accessories Limit Switch with 3 Pin 70cm Connecting Cable
9.5 GET ON AMAZON
3 HUABAN 6pcs Optical Endstop Light Control Limit Switch for RAMPS 1.4 Board 3D Printers Parts with 3 Pin Cable Accessories HUABAN 6pcs Optical Endstop Light Control Limit Switch for RAMPS 1.4 Board 3D Printers Parts with 3 Pin Cable Accessories
HUABAN
9.2 GET ON AMAZON
4 uxcell 2mm Inductive Proximity Sensor Switch Detector NPN NO DC 6-36V 100mA 3-Wire PR08-2DN for 3D Printer Probe Bed Leveling,MCU Board uxcell 2mm Inductive Proximity Sensor Switch Detector NPN NO DC 6-36V 100mA 3-Wire PR08-2DN for 3D Printer Probe Bed Leveling,MCU Board
uxcell
8.9 GET ON AMAZON
5 RLECS 4pcs 3D Printer Mechanical Endstop Ramps 1.4 Control Board Part Switch Accessories Limit Switch with 3 Pin 70cm Connecting Cable RLECS 4pcs 3D Printer Mechanical Endstop Ramps 1.4 Control Board Part Switch Accessories Limit Switch with 3 Pin 70cm Connecting Cable
RLECS
8.8 GET ON AMAZON
6 Ximimark A4988 DRV8825 3D Printer Stepper Motor Driver Control Extension Shield Board 3Pcs Ximimark A4988 DRV8825 3D Printer Stepper Motor Driver Control Extension Shield Board 3Pcs
Ximimark
8.7 GET ON AMAZON
7 uxcell 15mm Inductive Proximity Sensor Switch Detector NPN NO DC 6-36V 300mA 3-Wire PR30-15 DN for 3D Printer Probe Bed Leveling,MCU Board uxcell 15mm Inductive Proximity Sensor Switch Detector NPN NO DC 6-36V 300mA 3-Wire PR30-15 DN for 3D Printer Probe Bed Leveling,MCU Board
uxcell
8.6 GET ON AMAZON
8 DAOKI 5PCS Optical Endstop Light Control Limit Switch for RAMPS 1.4 Board 3D Printer Parts with 3 Pin Cable DIY + M3 Screw DAOKI 5PCS Optical Endstop Light Control Limit Switch for RAMPS 1.4 Board 3D Printer Parts with 3 Pin Cable DIY + M3 Screw
DAOKI
8.5 GET ON AMAZON
9 uxcell DC 6-36V 300mA 3-Wire Inductive Proximity NPN NC Switch Sensor Probe 8mm for 3D Printer Probe Bed Leveling,MCU Board uxcell DC 6-36V 300mA 3-Wire Inductive Proximity NPN NC Switch Sensor Probe 8mm for 3D Printer Probe Bed Leveling,MCU Board
uxcell
8.5 GET ON AMAZON
10 Aokin 3D Printer Parts and Accessories, 1pcs 3D Printer Stepper Motor Parallel Module with 100mm Cables for Double Z Axis Dual Z Stepping Motors Reprap Prusa Lerdge 3D Printer Board Aokin 3D Printer Parts and Accessories, 1pcs 3D Printer Stepper Motor Parallel Module with 100mm Cables for Double Z Axis Dual Z Stepping Motors Reprap Prusa Lerdge 3D Printer Board
Aokin
8.3 GET ON AMAZON

Antrader Endstop Mechanical Limit Switches with 3 Pin 70cm Cable for RAMPS 1.4 Control Board Part Switch Accessories 3D Printers Parts Set of 6

Antrader Endstop Mechanical Limit Switches with 3 Pin 70cm Cable for RAMPS 1.4 Control Board Part Switch Accessories 3D Printers Parts Set of 6

    Features:

  • 6 x Mechanical Endstop End Stop Limit Switches with 22WAG Cable.
  • Use for RepRap 3D Printers or CNC machines, it is supported by RepRap electronics, RAMPS 1.4 and by other popular RepRap boards.
  • 70cm length wire, copper wire inside is very thick, It can be resistant to 2A, 300V voltage.
  • Not easy to break, convenient for plug, ease for use, one side is an integrated plug.
  • Red line connecting VCC (ramps of +), Connect the black wire GND (ramps of -), Green Line connection SIGNAL (ramps in s).

Maxmoral 4pcs Mechanical Endstop 3D Printer Ramps 1.4 Control Board Part Switch Accessories Limit Switch with 3 Pin 70cm Connecting Cable

Maxmoral 4pcs Mechanical Endstop 3D Printer Ramps 1.4 Control Board Part Switch Accessories Limit Switch with 3 Pin 70cm Connecting Cable

    Features:

  • Type: 4 Sets Mechanical Endshop Limit Switch with 70cm 3-Pin Connecting Cable
  • High Quality Switch Element: Made of 22AWG wire, thick copper wire resistant to 2A current 300V voltage, up to 80 degree large temperature range of insulating layer.
  • Convenient to Use: Equipped with 3Pin male/female connector head, plug and play, easy to install.
  • Common Style: Fit for RepRap 3D Printers or CNC machines, it is supported by RepRap electronics, RAMPS 1.4 and other popular RepRap boards.
  • Wire Connection: Red line connects to VCC (ramps +); Black line connects to GND (ramps -); Green line connects to SIGNAL (ramps s)

uxcell 2mm Inductive Proximity Sensor Switch Detector NPN NO DC 6-36V 100mA 3-Wire PR08-2DN for 3D Printer Probe Bed Leveling,MCU Board

uxcell 2mm Inductive Proximity Sensor Switch Detector NPN NO DC 6-36V 100mA 3-Wire PR08-2DN for 3D Printer Probe Bed Leveling,MCU Board

    Features:

  • 【Specification】: Detecting Distance: 2mm; Supply Voltage: DC 6-36V; Current Output : 100mA; Detect Object : Iron; Thread Size: 8mm.
  • Wire Type: DC 3 Wire Type (Black, Brown, Blue); Switch Appearance Type: Cylinder Type; Theory: Inductive Sensor; Output Type: NPN NO(Nomal Open).
  • 【Sensitive Detection】: ABS material detection surface, the built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target object, it will send control signal.
  • 【Material】: Brass nickel-plated shell, not easy to rust and fade. With 120CM copper wire, strong and durable, and excellent electrical conductivity.
  • 【Application】: It is a component widely used in automatic control industry for detecting, controlling, and contactless switching. It is Widely used in mechanical automation, 3D Printer Probe Bed Leveling, paper making, light industry for limiting station, orientation taking count, speeding trial etc.

RLECS 4pcs 3D Printer Mechanical Endstop Ramps 1.4 Control Board Part Switch Accessories Limit Switch with 3 Pin 70cm Connecting Cable

RLECS 4pcs 3D Printer Mechanical Endstop Ramps 1.4 Control Board Part Switch Accessories Limit Switch with 3 Pin 70cm Connecting Cable

    Features:

  • Type: Mechanical Endshop Limit Switch with 70cm 3-Pin Connecting Cable
  • High quality switch element: Made of 22AWG wire, thick copper wire resistant to 2A current 300V voltage, up to 80 degree large temperature range of insulating layer
  • Convenient to use: Packed with 3Pin male/female connector head, plug and play, easy to install
  • Common style: Fit for RepRap 3D Printers or CNC machines, it is supported by RepRap electronics, RAMPS 1.4 and other popular RepRap boards
  • Wire connection: Red line connects to VCC (ramps +); Black line connects to GND (ramps -); Green line connects to SIGNAL (ramps s)

Ximimark A4988 DRV8825 3D Printer Stepper Motor Driver Control Extension Shield Board 3Pcs

Ximimark A4988 DRV8825 3D Printer Stepper Motor Driver Control Extension Shield Board 3Pcs

    Features:

  • The A4988/DRV8825 can be used, pay attention to the direction when inserting, otherwise the drive may be burnt.
  • The position where the jumper hits the ON DP indicates 16 subdivisions (4988) or 32 subdivisions (8825).
  • Jm connects the motor.
  • Jv connects 5V and 12V-24V power supplies.
  • Jc’s ESDG corresponds to the EnableStepDirGnd drive signal output on the connection.

uxcell 15mm Inductive Proximity Sensor Switch Detector NPN NO DC 6-36V 300mA 3-Wire PR30-15 DN for 3D Printer Probe Bed Leveling,MCU Board

uxcell 15mm Inductive Proximity Sensor Switch Detector NPN NO DC 6-36V 300mA 3-Wire PR30-15 DN for 3D Printer Probe Bed Leveling,MCU Board

    Features:

  • 【Specification】: Detecting Distance: 15mm; Supply Voltage: DC 6-36V; Current Output : 300mA; Detect Object : Iron; Thread Size: 30mm.
  • Wire Type: DC 3 Wire Type (Black, Brown, Blue); Switch Appearance Type: Cylinder Type; Theory: Inductive Sensor; Output Type: NPN NO(Nomal Open).
  • 【Sensitive Detection】: ABS material detection surface, the built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target object, it will send control signal.
  • 【Material】: Brass nickel-plated shell, not easy to rust and fade. With 200CM copper wire, strong and durable, and excellent electrical conductivity.
  • 【Application】: It is a component widely used in automatic control industry for detecting, controlling, and contactless switching. It is Widely used in mechanical automation, 3D Printer Probe Bed Leveling, paper making, light industry for limiting station, orientation taking count, speeding trial etc.

DAOKI 5PCS Optical Endstop Light Control Limit Switch for RAMPS 1.4 Board 3D Printer Parts with 3 Pin Cable DIY + M3 Screw

DAOKI 5PCS Optical Endstop Light Control Limit Switch for RAMPS 1.4 Board 3D Printer Parts with 3 Pin Cable DIY + M3 Screw

    Features:

  • Adopting optically transmissive principles of design, no loss, no noise with a longer service life.
  • Our product is based on the original design found HERE and is a improvement of Gen7 Endstop (OptoEndstop 2.1)
  • The optical endstop is a reliable endstop / switch solution for any type of 3D printers and other CNC and/ or 3D tools
  • Triggering is sensitive and quiet, supporting the use of RAMPS 1.4 plate.
  • Repeat positioning is in high accuracy.

uxcell DC 6-36V 300mA 3-Wire Inductive Proximity NPN NC Switch Sensor Probe 8mm for 3D Printer Probe Bed Leveling,MCU Board

uxcell DC 6-36V 300mA 3-Wire Inductive Proximity NPN NC Switch Sensor Probe 8mm for 3D Printer Probe Bed Leveling,MCU Board

    Features:

  • 【Specification】: Detecting Distance: 8mm; Supply Voltage: DC 6-36V; Current Output : 300mA; Detect Object : Iron; Thread Size: 18mm.
  • Wire Type: DC 3 Wire Type (Black, Brown, Blue); Switch Appearance Type: Cylinder Type; Theory: Inductive Sensor; Output Type: NPN NC(Normal Close).
  • 【Sensitive Detection】: ABS material detection surface, the built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target object, it will send control signal.
  • 【Material】: Brass nickel-plated shell, not easy to rust and fade. With 200CM copper wire, strong and durable, and excellent electrical conductivity.
  • 【Application】: It is a component widely used in automatic control industry for detecting, controlling, and contactless switching. It is Widely used in mechanical automation, 3D Printer Probe Bed Leveling, paper making, light industry for limiting station, orientation taking count, speeding trial etc.

Aokin 3D Printer Parts and Accessories, 1pcs 3D Printer Stepper Motor Parallel Module with 100mm Cables for Double Z Axis Dual Z Stepping Motors Reprap Prusa Lerdge 3D Printer Board

Aokin 3D Printer Parts and Accessories, 1pcs 3D Printer Stepper Motor Parallel Module with 100mm Cables for Double Z Axis Dual Z Stepping Motors Reprap Prusa Lerdge 3D Printer Board

    Features:

  • Module Size: 27mm/1.06in x 15mm/0.59in; Cable Length: 100mm/3.94in; Weight: 5g
  • Package Included: 1pcs stepper motor parallel modules with 1pcs 100mm cables, easy to connect.
  • Application: special design for stepper motor-side parallel, a driver drives two motors, put them in-line (series) with the motor.
  • Compatible: this module is only used for small printers or small current motors in parallel (with the same motor in parallel, the current are divided evenly).
  • If you have any issues for our products, please contact us by Amazon message, we will do our best for you.

As an Amazon Associate I earn from qualifying purchases.

Random products:

hand sewing machines
hand quilting needles